Front Brake Disc Honda Accord IV V 282 mm – ATE 24.0125-0130.1
Check part compatibility
ATE front brake disc 24.0125-0130.1 fits selected Honda Accord IV and Honda Accord V models with 282 mm front brakes. This disc cross-references OEM 45251-SM5-A00 and is sold per 1 piece.
This ATE disc is specified for Accord applications listed below with 4 mounting holes, 25 mm maximum thickness, 23 mm minimum thickness and 34.5 mm height. Match the dimensions on your car before ordering if your Accord has been converted or uses non-standard brakes.
Applications
The fitment below covers the Honda Accord variants provided for this brake disc.
| Model | Engine / Chassis | Years |
|---|---|---|
| Honda Accord IV | 2.2 CB8 | 1991–1994 |
| Honda Accord V | 2.0 CC9 | 1993–1994 |
| Honda Accord V | 2.0 CE2 | 1994–1998 |
| Honda Accord V | 2.2 CE1 | 1994–1998 |
| Honda Accord V | 2.0 CD / CC | 1993–1998 |
| Honda Accord V | 2.2 CD | 1994–1998 |
OEM Numbers
For fitment check, this ATE disc cross-references the following Honda OEM number:
- 45251-SM5-A00
When to Replace / Symptoms of Wear
Brake disc condition should be checked whenever you service pads or notice braking issues.
- Brake vibration felt through the pedal or steering wheel
- Visible scoring or heat marks on the disc surface
- Lip on the outer edge from wear
- Disc thickness close to or below 23 mm
- Uneven pad wear on the same axle
- Reduced braking smoothness during normal road use
Installation and Service Tips
Correct installation matters as much as the disc choice itself.
- Sold per 1 piece; front discs are typically replaced in pairs.
- Check pad condition and hardware when fitting new discs.
- Clean the hub face carefully so the disc sits flush.
- Measure the old disc if your car has non-standard brakes or a previous brake swap.
- Bed in new discs and pads gradually after installation.
FAQ – frequently asked questions about Front Brake Disc Honda Accord IV V 282 mm – ATE 24.0125-0130.1
Can I buy just one brake disc?
Yes. This listing is for 1 piece, but on the front axle discs should normally be changed as a pair.
Do I need to change brake pads with new discs?
New pads are strongly recommended when fitting new discs, especially if the old pads have uneven wear or have already bedded into the previous disc surface.
How do I confirm this disc if my Accord has different brakes?
Use the key dimensions from this listing: 282 mm diameter, 25 mm max thickness, 23 mm minimum thickness, 34.5 mm height and 4 holes.
