91206-PHR-003 – Honda transmission oil seal 35x58x8

Product description

The 91206-PHR-003 is a genuine Honda transmission / driveshaft oil seal with dimensions 35x58x8 mm. It seals the connection between the drive shaft and the gearbox housing, keeping the transmission oil inside and protecting the driveline against premature wear.

The part number 91206-PHR-003 – often written as 91206 phr 003 or 91206phr003 – identifies this specific genuine Honda oil seal used in many manual gearboxes. It is the direct OEM replacement for the factory-installed seal.

Application – Honda models

This oil seal is used in many manual transmission Honda models:

• Honda Accord 4D 2003–2007
• Honda Accord Tourer 2003–2007
• Honda Civic 3D 2001–2011
• Honda Civic 4D 2001–2016
• Honda Civic 5D 2001–2011
• Honda Civic 2D 2001–2005
• Honda CR-V 2002–2006
• Honda FR-V 2005–2006
• Honda Insight 2000–2014
• Honda Jazz 2002–2020
• Honda Stream 2001–2005

If you are not sure whether the 91206-PHR-003 seal fits your car, send us your VIN – we will check compatibility in the Honda catalogue.

If you are servicing the gearbox while replacing this seal, we recommend using genuine Honda MTF-3 manual transmission fluid to ensure proper lubrication and long-term protection of the synchronisers and bearings.

Why replace the 91206-PHR-003 oil seal?

This seal works all the time while you drive. With mileage and age the rubber hardens and the sealing lip wears out. Typical symptoms of a worn 35x58x8 seal are:

• fresh transmission oil around the driveshaft where it enters the gearbox,
• oil drops on the undertray or driveway,
• visible play or damage on the old seal during inspection.

Ignoring a leaking 91206-PHR-003 can lead to a drop in gearbox oil level and, in extreme cases, serious damage to the transmission.

Advantages of using a genuine Honda seal

• Correct 35x58x8 size: perfect fit on the dri91206-PHR-003veshaft and in the gearbox housing.
• OEM material and design: rubber compound and spring tension matched to Honda gearboxes.
• Reliable sealing: protects against oil leaks even in daily and highway use.
• Easy installation: the same shape and depth as the factory-installed seal.

FAQ – 91206-PHR-003 Honda transmission oil seal

Is this the correct seal for my gearbox?
If your catalogue or old part shows 91206-PHR-003 or the size 35x58x8, this is the right seal. When in doubt, contact us with your VIN.

Can I use a random 35x58x8 seal instead?
Generic seals may have different lip design, hardness or depth. For Honda manual gearboxes we recommend the genuine 91206-PHR-003 to keep correct preload and long-term sealing.

Where exactly is this seal installed?
It is mounted in the gearbox casing at the driveshaft (axle shaft) output. During replacement the driveshaft is removed, the old seal is pulled out and the new one is pressed in flush with the housing.