Honda speed sensor O-ring 23.5x2 – 91313-611-010

O-ring speed sensor Honda 23.5x2 – 91313-611-010

Genuine Honda O-ring with dimensions 23.5 x 2 mm, used most often as the seal for the speed sensor (VSS) in both manual and automatic gearboxes. Ensures correct sealing between the speed sensor body and the transmission housing, preventing oil leaks and protecting the sensor from contamination.

Part 91313-611-010 replaces earlier Honda references 91313-PG1-L60, CDU84 and 23817-P6A-305.

Dimensions and function of the Honda speed sensor O-ring

The O-ring is manufactured from oil- and temperature-resistant rubber, designed to work in direct contact with gearbox oil. Loss of elasticity or damage to this seal may lead to:

• Oil seepage around the speed sensor
• Contamination of the sensor and possible reading errors
• Gradual loss of gearbox oil, increasing wear of internal components

Because of its low price and critical role in sealing, the O-ring should always be replaced when the speed sensor is removed or when working on the gearbox.

Applications – Honda and Acura models

The O-ring 91313-611-010 is used in many Honda and Acura models from the mid-80s to the 2000s, usually as the speed sensor seal in both manual and automatic transmissions.

Selected applications:

• Acura 2.5TL 1995–1998
• Acura 3.2TL 1996–1998
• Acura 3.5RL 1996–2004
• Accord 3D 1986–1989
• Accord 4D 1986–1994; 1999–2002
• Accord 5D 1999–2002
• Accord Aerodeck 1994–1997
• Accord Coupe 1992–2002
• Accord Wagon 1991–1993
• Civic 3D 1986–2000
• Civic 4D 1988–2000
• Civic 5D 1995–1999
• Civic Aerodeck 1998–1999
• Civic Coupe 1994–2000
• Civic CRX 1986–1997
• Civic Shuttle 1986–1995
• Concerto 1989–1993
• HR-V 1999–2005
• Integra 3D 1998–2000
• Integra 5D 1986–1988
• Jazz 1985
• Legend 4D 1986–2004
• Legend Coupe 1988–1995
• Logo 3D 1999
• NSX 1991–2005
• Odyssey 1995–2001
• Prelude 1987–2000
• Shuttle 1995–1997

If you are not sure whether this O-ring fits your car, send us the VIN – we will verify compatibility free of charge.

FAQ – O-ring speed sensor Honda 91313-611-010

Does 91313-611-010 fit both manual and automatic gearboxes?
Yes – in most listed models it is used as the seal for the speed sensor in both manual and automatic transmissions. Always compare with the old seal before installation.

When should I replace this O-ring?
Always replace it when the speed sensor is removed, when you see oil seepage around the sensor, or during gearbox service and seal replacement.

Does this part replace 91313-PG1-L60, CDU84 and 23817-P6A-305?
Yes – 91313-611-010 is the current Honda replacement for these earlier numbers, with the same dimensions and application.