STRONGFLEX 086219A – front suspension bush kit SPORT Honda Civic VIII FK/FN/FN2

STRONGFLEX 086219A – front suspension bush kit SPORT Honda Civic VIII FK/FN/FN2

STRONGFLEX 086219A is a complete front suspension polyurethane bush kit in SPORT hardness (90ShA) designed for the eighth-generation Honda Civic hatchback. It replaces the OEM rubber bushes in the front lower control arms and the front anti-roll bar, improving geometry stability, steering response and feedback – especially during fast road driving, track days and spirited cornering.

Application – Honda Civic VIII hatchback

Fits:

• Honda Civic VIII (2006–2011) Hatchback FK / FN / FN2
• including Honda Civic FN2 Type R

The kit fits not only the FN2 Type R, but also other Civic VIII hatchback versions with the above chassis codes (FK, FN, FN2), provided that the front suspension layout is original or equivalent to OEM.

Kit contents – STRONGFLEX polyurethane bushes

Kit 086219A includes:

• 2 × 081800A – front lower arm front bush SPORT
  Replaces the front bush in the front lower control arms.
• 2 × 081801A – front lower arm rear bush SPORT
  Replaces the rear bush in the front lower control arms.
• 2 × 081802A – front anti-roll bar bush SPORT
  Mounting bushes for the front stabiliser / anti-roll bar (select correct diameter).

Total bushes in kit: 6 pcs
Quantity required per car: 1 kit

Material and hardness – SPORT 90ShA

Material: polyurethane (PUR/PU)
Version: SPORT – hardness approx. 90 ShA
Standard colour: yellow (black version available depending on offer)

Compared to OEM rubber, STRONGFLEX polyurethane offers much higher resistance to deformation, oil and ageing. The bushes keep the front axle geometry more stable under load, which translates into:

• more precise and direct steering,
• better turn-in and control in corners,
• more predictable handling at higher speeds,
• reduced unwanted movement of the front suspension components.

Front anti-roll bar diameter – correct selection

This kit is available for several stabiliser bar diameters (for example: 22 / 23 / 24 mm or custom size – depending on the specific offer).

Before ordering, measure the actual diameter of the front anti-roll bar with a vernier caliper on a clean, straight section of the bar. Choosing the correct diameter is essential for:

• proper clamping and seating of the bush on the bar,
• avoiding play or excessive preload,
• long-term durability of both the bush and the bar mounting.

Notes on installation and use

• Professional installation is recommended, especially if you have no prior experience with suspension work.
• After replacing the bushes, a full wheel alignment (toe, camber, caster where applicable) should always be performed.
• The kit can be used with OEM shock absorbers as well as lowering springs and coilovers, provided that other suspension components are in good condition.
• Before pressing out the old bushes, compare the original layout and orientation with the new polyurethane parts.

Grease is supplied with the product.

FAQ – STRONGFLEX 086219A front suspension bush kit

FAQ – Is STRONGFLEX 086219A suitable for daily driving?

The SPORT compound (90ShA) is stiffer than OEM rubber, so you will feel a firmer and more direct front end. For a well-maintained Civic VIII used on the road and for occasional track days, it is a popular compromise between precision and acceptable comfort. On rough roads, expect slightly more vibration and noise compared to soft OEM bushes.

FAQ – What is the difference between yellow and black STRONGFLEX bushes?

In the SPORT version for this kit, yellow and black bushes typically share the same hardness (90ShA). The difference is mainly visual / aesthetic or related to a specific product line. In some cases black bushes may be produced to order, which can slightly extend the lead time – always check current availability in the product description.

FAQ – Do I really need to measure the front anti-roll bar?

Yes, we strongly recommend measuring the bar directly with a caliper. VIN or model data may be misleading if the stabiliser bar has been changed, the car comes from another market, or the suspension has been modified. A precise measurement helps you choose the correct bush diameter and avoid issues during installation.

FAQ – Is wheel alignment necessary after fitting STRONGFLEX 086219A?

Yes. Replacing front suspension bushes affects how the control arms sit in relation to the subframe and hubs. After installing the STRONGFLEX 086219A front suspension bush kit, a professional wheel alignment is essential to optimise handling, tyre wear and braking stability.

FAQ – Can STRONGFLEX 086219A be used with lowering springs or coilovers?

The kit is often used together with sport springs and coilovers. Stiffer polyurethane bushes support more consistent suspension work under increased loads and reduced ride height, as long as the dampers, top mounts and other components are in good condition.