Inner Tie Rod Left / Right Honda Civic CRX Shuttle 1987–1991 – 555
- Availability: Out Of Stock
- Brand: 555
- Product Code: SR-6170
- Weight: 0.50kg
-
80.00zł
This 555 inner tie rod fits Honda Civic, CRX and Shuttle models from 1987–1991. It fits left or right side and cross-references OEM 53521-SH3-003.
A good-quality 555 steering part for older Honda models where correct fit and thread compatibility matter. If you are unsure about the exact application by chassis or engine version, VIN check is recommended.
Applications
This part fits the following Honda models from the 1987–1991 range:
- Honda Civic – 1987–1991
- Honda CRX – 1987–1991
- Honda Shuttle – 1987–1991
OEM Numbers
The number below is provided as an OEM cross-reference for fitment confirmation:
- 53521-SH3-003
When to Replace / Symptoms of Wear
- Play felt in the steering
- Knocking from the steering assembly over bumps
- Loose or less precise steering response
- Uneven steering feel between left and right turns
- Wear found during front-end inspection
Installation and Service Tips
- Fits left and right side.
- Compare the old part with the new one before installation.
- Check tie rod ends and steering boots while the assembly is apart.
- Set the length close to the removed part as a starting point.
- Wheel alignment is recommended after replacement.
FAQ – frequently asked questions about Inner Tie Rod Left / Right Honda Civic CRX Shuttle 1987–1991 – 555
Can I replace just one side or should I do both?
If one inner tie rod is worn and the other is still tight, you can replace one side only. On older cars, many owners inspect both sides together and replace them as a pair if wear is similar.
How can I tell if the inner tie rod is worn without removing it?
Free play during steering inspection, knocking from the rack area, or movement felt after disconnecting the outer end can point to a worn inner tie rod. A proper check is easiest with the front end lifted.
Do I need any other parts at the same time?
It is worth inspecting the steering boot clamps and the outer tie rod end condition during the job. On older Honda models, cracked boots or a worn outer end are often found at the same time.
Tags: SR-6170, 53521-SH3-003, Civic, CRX, Shuttle, inner tie rod, 555
Bestsellers
89.00zł
Manual Transmission Fluid Honda MTF-3 OEM 08267-99902HE / PRO 1L
Honda MTF-3 Manual Transmission Fluid Genuine Honda MTF-3 Manual Transmission Fluid is an origi..
30.00zł
NOK BH3888E Honda distributor oil seal
Distributor oil seal NOK BH3888E.Size 12,5x22,5x5 mm..
24.00zł
Oil filter Knecht OC617 Honda
OC617 is successor filter OC115. Is used in most gasoline engines Hondas..
69.00zł
Ball joint upper Honda Prelude 33,4 mm
Upper Control Arm Ball Joint Honda Prelude 4/5 – 33.4 mm (prel33-5) Press-in upper control arm ..
55.00zł
Oil filter Honda OEM 15400-PLM-A01
Oil filter Honda OEM 15400-PLM-A01. High quality oil filter with excellent properties of fil..
49.00zł
15400-RTA-003 Honda Oil Filter – Genuine OEM, Made in Japan
Genuine Honda 15400-RTA-003 oil filter – Made in Japan The Honda 15400-RTA-003 is a genuine Hon..
49.00zł
Uperr ball joint CTR CBHO-28 Honda Civic CRX Accord Prelude
Uperr ball joint. Producer - CTR. Diameter 35,5 mm Application: Honda Civic 4 gen 1997-1991 ..
178.78zł
Genuine Honda Rear Trailing Arm Bushing 52385-SR3-003
Genuine Honda Rear Trailing Arm Bushing 52385-SR3-003 – “Candy” OEM Bushing Genuine Honda Rear Tr..








