Ball joint lower 555 Honda Accord Odyssey Shuttle

555 SB-6182 is a lower ball joint for selected Honda models, including Accord 1990–1999 front suspension, Odyssey 1995–1997 front suspension, Shuttle 1995–1997 front suspension, and Prelude 1988–1991 rear suspension. This 555 brand part is a practical OE-style alternative for restoring proper fit and eliminating play in the original joint location.

Fitment depends on model and suspension position, so it is important to match the application exactly before ordering. The OEM cross-reference numbers listed below help confirm compatibility with the original Honda part used in your vehicle.

Applications

This ball joint fits the following Honda applications based on the available product data:

If your car falls within these ranges but you are unsure about the exact suspension version, VIN verification is recommended before purchase.

OEM reference numbers

Cross-references OEM:

• 51220-SM1-A01
• 51220-SM1-A02
• 51220-SM4-003
• 51220-SM4-013
• 51220-S0A-J01
• 52220-SF1-003

When to replace / symptoms of wear

A worn lower ball joint usually shows up as looseness, knocking from the suspension, or unstable wheel location over bumps. Uneven tyre wear, vague handling, or visible play found during inspection are also common reasons to replace the joint.

If one side is worn, the opposite side on the same axle should also be inspected carefully, as wear often develops in pairs.

Installation and service tips

Correct installation is important for service life and proper fit. Clean the mounting area before assembly and compare the new part with the old one before pressing or fastening it into place.

• Check the exact suspension position before installation, as this part is front on some models and rear on Prelude 1988–1991.
• Inspect the matching control arm, knuckle and surrounding suspension components for wear at the same time.
• After replacement, a suspension geometry check is recommended if any related components were removed.
• Use VIN confirmation if there is any doubt about chassis version or fitment.

FAQ – frequently asked questions about Lower Ball Joint – Honda Accord 1990–1999 / Odyssey Shuttle – 555

Does SB-6182 fit both front and rear suspension?
It depends on the model. Based on the available application data, SB-6182 fits the front suspension on Honda Accord, Odyssey and Shuttle, but the rear suspension on Honda Prelude 1988–1991.

How can I confirm this ball joint fits my Honda?
The safest method is to match the OEM cross-reference number and verify the model, year range and suspension position. If your vehicle has a market-specific version, VIN checking is recommended.

Should lower ball joints be replaced in pairs?
Replacing both sides on the same axle is generally good practice when wear is similar, especially on older suspension setups. At minimum, the opposite side should be inspected during the repair.

Is 555 a good choice for Honda suspension parts?
555 is a well-known brand in the Japanese car parts market and is commonly chosen for Honda suspension service where reliable fit and OE-style design are important.