PFI 6001-012 Ignition Distributor Bearing – 12.5×28×8 mm

The PFI 6001-012 ignition distributor bearing is a precision component designed for use in older Honda models equipped with a mechanical distributor. Its specific dimensions – 12.5×28×8 mm – make it a rare and non-standard part, not listed in official Honda parts catalogs. For best fitment, it is recommended to measure the removed original bearing before installation.

This bearing serves as a quality replacement for the discontinued Nachi 6001-012 model, sharing identical dimensions and function. Manufactured from high-grade bearing steel with smooth raceways and precise internal clearance, the PFI 6001-012 ensures smooth, quiet, and durable operation of the distributor shaft.

Applications – PFI 6001-012 Bearing in Honda Vehicles

This bearing is used in the ignition distributors of many Honda models produced from the mid-1980s to the early 2000s, including:

• Honda Civic 4th Gen (1987–1991)
• Honda Civic 5th Gen (1991–1995)
• Honda Civic 6th Gen (1996–2001)
• Honda Civic UK 5th Gen (1995–1996)
• Honda Civic UK 6th Gen (1997–2000)
• Honda CRX 1st Gen (1984–1987)
• Honda CRX 2nd Gen (1988–1991)
• Honda CRX 3rd Gen (1992–1998)
• Honda Prelude 4th Gen (1992–1996)
• Honda Prelude 5th Gen (1997–2001)

Because this bearing is not separately listed by Honda, measuring the old bearing is highly recommended before purchasing to confirm compatibility with your distributor assembly.

PFI 6001-012 Bearing Features

• Dimensions: 12.5 mm (ID) × 28 mm (OD) × 8 mm (width)
• Made from durable, high-temperature bearing steel
• Direct replacement for discontinued Nachi 6001-012
• Used in Honda Civic, CRX and Prelude distributor housings
• Precise machining ensures stable and quiet shaft rotation
• Fitment should be verified by measuring the removed bearing

FAQ – PFI 6001-012 Ignition Distributor Bearing

Is the PFI 6001-012 a genuine Honda part?
No. This bearing is not listed as an OEM Honda part. It is an aftermarket replacement designed to fit distributors where the original Nachi 6001-012 was installed.

What are the dimensions and how to verify fitment?
12.5 mm inner diameter, 28 mm outer diameter, 8 mm width. Because this is a non-standard size, it’s strongly advised to measure your old bearing before ordering.

Is the PFI bearing better than Nachi?
No – both brands offer comparable precision and durability. Nachi was the original supplier, while PFI provides a solid, currently available alternative for discontinued applications.