Lower Control Arm Ball Joint CTR CB0106 (CBHO-13) – 43 mm | Honda Prelude IV/V / FR-V Diesel

The CTR CB0106 lower control arm ball joint (former part number CBHO-13) is a press-fit ball joint installed directly into the steering knuckle. It is responsible for proper wheel guidance, suspension stability and elimination of play. The critical fitment parameter is the 43 mm press-in diameter.

This ball joint is used in both front and rear steering knuckles of Honda Prelude IV and V generation. It is also used in the front steering knuckle of Honda FR-V, but diesel versions only.

Applications

• Honda Prelude IV (1992–1996) – front and rear
• Honda Prelude V (1997–2001) – front and rear
• Honda FR-V (2006–2009) – front only, diesel engines only

Important – Honda Prelude V VTiS:
In the Prelude V VTiS, the front steering knuckle uses two different lower ball joints. The CTR CB0106 (43 mm) described here is one of them. The second ball joint required for the same front knuckle is: Lower Ball Joint – Honda Prelude V VTiS (CTR CB0127) .

OEM reference numbers

The following numbers are provided as reference only and are used for identification and comparison:

• 51220-SL5-003
• 51220-SL5-013

Technical data

• Type: lower control arm ball joint (press-fit)
• Press-in diameter: 43 mm
• Mounting location: steering knuckle
• Axle: front and rear (Prelude), front (FR-V diesel)
• Manufacturer: CTR
• CTR part numbers: CB0106 (current), CBHO-13 (former)

When to replace / symptoms of wear

• knocking or metallic noises from the wheel area
• detectable play in the suspension
• unstable handling or wandering on the road
• noise when steering or braking
• uneven tyre wear

Installation notes

• This is a press-fit ball joint – installation requires a hydraulic press.
• Always inspect the steering knuckle bore for wear or ovalisation.
• After replacement, wheel alignment inspection is recommended.
• For best results, replace ball joints in pairs on the same axle.

FAQ – Lower Control Arm Ball Joint CTR CB0106 / CBHO-13

Are CB0106 and CBHO-13 the same ball joint?
Yes. CB0106 is the current CTR part number, while CBHO-13 is the former number. Both refer to the same ball joint.

Does it fit all Honda Prelude IV and V models?
Yes, it fits front and rear steering knuckles of Prelude IV and V. The exception is the Prelude V VTiS, where two different ball joints are used on the front axle.

Does it fit Prelude V VTiS front suspension?
Yes, but only as one of two required ball joints. The second ball joint is CTR CB0127.

Does it fit Honda FR-V petrol models?
No. This ball joint fits Honda FR-V diesel versions only and front axle only.