Honda OEM Axle Support Bearing Seal 91260-SR3-004 – 40x55.5x9/10.8

Honda OEM Axle Support Bearing Seal 91260-SR3-004 – 40x55.5x9/10.8

Genuine Honda OEM axle support bearing seal 91260-SR3-004, used in selected Honda models as a sealing element in the axle support area. Its main function is to help protect the axle support bearing against dirt, moisture and other contaminants that may shorten bearing life.

This seal measures 40x55.5x9/10.8 and is manufactured to Honda factory specifications for proper fit in the housing and correct cooperation with the axle support working surface. Part number 91260-SR3-004 supersedes the older number 91260-SR3-003. For the best fitment accuracy, VIN verification is recommended.

Applications

• Honda Accord 4D 1993–2015
• Honda Accord 5D 1999–2002
• Honda Accord Tourer 2003–2015
• Honda Civic 3D 1992–2000
• Honda Civic 4D 1992–2000
• Honda Civic 5D 1997, 1999
• Honda Civic Aerodeck 1998–1999
• Honda Civic Coupe 1999–2000
• Honda CRX 1992–1997
• Honda CR-V 1997–2001
• Honda Integra 3D 1998–2000
• Honda Integra 4D 1994–2001
• Honda Odyssey 1995–1997
• Honda Prelude 1992–2001
• Honda Shuttle 1995–1997

Actual fitment may vary depending on drivetrain configuration, market and axle support design, so it is best to confirm compatibility by VIN or OEM catalog data before ordering.

OEM numbers

• 91260-SR3-004 – genuine Honda OEM part number
• 91260-SR3-003 – superseded older number

When to replace / symptoms of wear

• visible wear or damage found during axle support disassembly,
• dirt or moisture reaching the axle support bearing area,
• deteriorating condition of the axle support bearing,
• hardened, brittle or damaged sealing lip,
• recommended replacement during axle support or drivetrain service.

A worn axle support seal can accelerate wear of the support bearing, so it is worth inspecting and replacing it whenever this area is serviced.

Installation and service tips

• Before installing the new seal, inspect the axle support housing and the working surface of the axle.
• The seal should be installed evenly, without distortion and without damaging the sealing lip.
• It is a good idea to inspect the axle support bearing itself, because seal wear often goes together with bearing wear.
• Keep the area clean during installation to avoid introducing dirt into the bearing and sealing area.
• If the axle support has been dismantled, check for smooth operation and absence of excessive play after reassembly.

FAQ – common questions about Honda OEM axle support bearing seal 91260-SR3-004

Is 91260-SR3-004 a genuine Honda part?
Yes, this is a genuine Honda OEM seal with part number 91260-SR3-004.

Does 91260-SR3-004 replace 91260-SR3-003?
Yes, part number 91260-SR3-004 supersedes the older number 91260-SR3-003.

What are the dimensions of this seal?
The seal measures 40x55.5x9/10.8.

What is the function of the axle support seal?
Its role is to help protect the axle support bearing from dirt, moisture and contaminants that could reduce bearing life.