Strongflex 086232A – front subframe bush kit SPORT Honda Accord VII / Acura TL TSX

Strongflex 086232A – front subframe bush kit SPORT Honda Accord VII / Acura TL TSX

Strongflex 086232A is a polyurethane front subframe bush kit designed mainly for Honda Accord VII (2003–2008) and compatible Acura models. The stiffer 90 ShA bushes replace the ageing factory rubber mounts, reducing unwanted movement of the front subframe, sharpening steering response and improving front-end stability during fast cornering and hard braking.

Application – compatible cars

The kit fits the following models:

• Honda Accord VII (2003–2008) Sedan / Coupe CL / CM
• Honda Accord VII (2003–2008) Tourer CM
• Acura TL III (2003–2008) UA6 / UA7
• Acura TSX I (2003–2008) CL9

The kit is an excellent choice for Accord owners who drive dynamically on the road or use the car for occasional track days and want a more precise, direct front end.

Kit contents – Strongflex 086232A

The set replaces all front subframe mounting bushes:

• 2 × 081829A – front subframe front bush (SPORT, 90 ShA)
  Replacement for Honda OEM: 50260-SEA-E01, 50260-SDA-A01
• 2 × 081830A – front subframe rear bush (SPORT, 90 ShA)
  Replacement for Honda OEM: 50270-SEA-E01

Number of kits required per car: 1
Number of bushes in the kit: 4

Technical data

• Product number: 086232A
• Hardness: 90 ShA (SPORT specification)
• Material: polyurethane (PUR / PU)
• Position: front subframe (front and rear mounts)

Each Strongflex bush kit is supplied with dedicated assembly grease to ensure correct installation and long-term, noise-free operation.

Why choose Strongflex 086232A for your Accord?

• Significantly reduced subframe movement under braking and during cornering.
• More precise steering feel and better feedback from the front axle.
• Improved geometry stability for lowered and modified suspension setups.
• Durable polyurethane resists deformation, oil and age better than OEM rubber.
• Suitable for dynamic street use and occasional track days.

Note: due to the increased stiffness compared to factory rubber bushes, some additional NVH (noise, vibration, harshness) may be noticeable, especially on rough roads. This is a natural effect of a performance-oriented front subframe mounting.

FAQ – Strongflex 086232A front subframe bush kit Honda Accord VII / Acura TL TSX

Do I need one or two Strongflex 086232A kits per car?

Only one kit is required per car. The set contains four bushes and replaces all factory front subframe mounting points on the Accord / Acura platform.

Is Strongflex 086232A suitable for a daily driven Honda Accord VII?

Yes, the kit can be used in a daily driven car, especially if you value precise steering and stable handling. However, the 90 ShA performance specification is stiffer than OEM rubber, so comfort-focused drivers should be prepared for a slightly more direct, “solid” feel of the front end.

Do I need to modify the subframe to fit Strongflex 086232A?

No additional modifications are normally required. The bushes are designed as direct replacements for the OEM parts listed above. We recommend professional installation with the correct tools to press out the old rubber bushes and install the polyurethane inserts.

Can Strongflex 086232A be combined with other polyurethane suspension kits?

Yes, the front subframe kit can be combined with other polyurethane arm and anti-roll bar bushes for the Honda Accord VII / Acura TL TSX platform. Upgrading multiple mounting points further improves chassis precision, especially on tuned cars with sport springs, coilovers or stickier tyres.