Honda Driveshaft Oil Seal OEM 91206-PL3-A01 (35x62x8 mm)

Honda OEM driveshaft oil seal 91206-PL3-A01 is designed to seal the connection between the driveshaft and the transmission case. Its function is to prevent gearbox oil leaks and protect internal components from dust, water, and debris. Although small, this component plays a vital role in maintaining the reliability of your Honda’s drivetrain.

Specifications and Features

• OEM Number: 91206-PL3-A01 (replaces 91206-PL3-A00)
• Dimensions: 35 × 62 × 8 mm
• Type: Differential / driveshaft oil seal
• Function: Keeps transmission oil inside the gearbox and prevents external contamination from entering the housing.

This genuine Honda seal is made of high-quality NBR (nitrile rubber) with an internal metal reinforcement ring, ensuring long-term stability under high temperature and rotational load. The precisely shaped sealing lip maintains constant pressure and prevents leaks even under dynamic driving conditions.

Compatibility – Fits the Following Models

• Honda Accord (1998–2002) – 1.6 L only
• Honda Civic 3D (1988–2000)
• Honda Civic 4D (1988–2000)
• Honda Civic Coupe 2D (1994–2000)
• Honda CRX (1992–1997)
• Honda Civic Shuttle (1988–1991)
• Honda Concerto (1990–1993)
• Honda Logo (1999–2000)

Symptoms of a worn driveshaft oil seal

• Visible gearbox oil leak near the driveshaft connection.
• Greasy buildup around the transmission or inner CV joint.
• Unusual gearbox noise caused by low oil level.
• In severe cases – transmission damage or seizure due to loss of lubrication.

The seal should be replaced whenever the driveshaft is removed or during transmission servicing. Using an original Honda OEM seal guarantees perfect fitment and long-term leak-free performance.

FAQ – Frequently Asked Questions about Honda Driveshaft Oil Seal 91206-PL3-A01

1. Does this seal fit both sides of the transmission?
Not always. In most Civic and Accord gearboxes, the left and right driveshaft seals differ in size. Always confirm by VIN before ordering.

2. Can I use an aftermarket replacement?
Yes, but genuine Honda OEM seals use superior rubber compounds and maintain sealing performance far longer than generic copies.

3. Do I need to drain the gearbox oil before replacing the seal?
Yes – the seal sits below the oil level, so the transmission fluid must be drained and refilled after installation.

4. Are special tools required for installation?
No, but it’s recommended to use a socket or seal driver matching the outer diameter to press the new seal evenly without damaging the edge.

5. What is the typical service life of this seal?
When properly installed and with no play in the driveshaft, it typically lasts 100 000 – 150 000 km without leakage.

The genuine Honda driveshaft oil seal 91206-PL3-A01 ensures perfect gearbox sealing, reliability, and protection against leaks. Choose original Honda quality – engineered for lasting performance.